Kodak M5350 - Manual (Page 53)

Troubleshooting
www.kodak.com/go/support 47
Computer/connectivity
Direct printing (PICTBRIDGE enabled Printer)
Picture quality
Cannot find the
desired picture/video ■ To view pictures on a card or in internal memory, see page 20 .
Status Solution
Computer does not
communicate with
the camera ■ Turn off the camera, then turn it back on.
■ Make sure the battery is charged and installed correctly ( see
page 1 ).
■ Make sure the KODAK Camera USB Cable, Micro B / 5-Pin is
connected to the camera and the computer (
see page 43 ). Then
turn on the camera.
■ See KODAK Software Downloads at
www.kodak.com/go/camerasw .
Status Solution
Cannot print ■ The camera must be in PTP (not mass storage) mode. Change the
Computer Connection setting (in the Settings menu) to Other
Application (
see page 41 ).
Status Solution
Picture is not clear ■ To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■ Clean the lens ( see page 51 ).
■ Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■ Use a larger picture size ( see page 40 ).
■ If you’re manually adjusting the ISO speed, realize that a high ISO
setting may cause grainy pictures (
see page 17 ).
Status Solution