Kodak M893 IS - Manual (Page 56)

50 www.kodak.com/go/support
Troubleshooting
Stored pictures are
corrupted. ■ Retake pictures. Do not remove card while the camera is accessing it.
Keep rechargeable batteries charged.
■ Transfer pictures to the computer (see page 45 ), then format the card
in the camera ( see page 34 ).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen. ■ Check the image storage location setting ( see page 33 ).
In Review mode, a
blue or black
screen is displayed
instead of a
picture. ■ Transfer the picture to the computer (see page 45 ), then format the
card in the camera ( see page 34 ).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Picture is too light. ■ Decrease Exposure Compensation (see page 36 ).
■ Turn off the flash, then move back from the subject.
Picture is not clear. ■ Clean the lens ( see page 60 ).
■ Make sure your camera is not in Close-up mode.
■ Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■ Place the camera on a flat, steady surface or use a tripod.
Picture is too dark. ■ Turn on the flash (see page 8 ).
■ Move so that the distance between you and the subject is within the
effective flash range (
see page 58 ).
■ Use Fill flash ( page 8 ) or change your position so light is not behind
the subject.
■ Increase Exposure Compensation (see page 36 ).
If... Try one or more of the following