Lenovo A10 Lenovo - Manual (Page 39)

Lenovo IdeaPad A10
35
1030 LCD unit
For access, remove these FRUs in order:
• “1010 Battery pack” on page 30
• “1020 System board” on page 32
Figure 4. Removal steps of LCD unit
Remove four screws .
When installing:
• Route the antenna cables along the cable guides. As you route the cables,
make sure that they are not subjected to any tension. Tension could cause the
cables to be damaged by the cable guides, or a wire to be broken.
• Make sure that the LCD connector is attached firmly and make sure that you
do not pinch the antenna cables when you attach the LCD assembly. Route
the LCD cable along the cable guides.
Step Screw (quantity) Color Torque
M2.5 × 4 mm, flat-head, nylok-coated (4) Black 1.85±0.15kgfcm
a
a
a
a
a
a