Lenovo A10 Lenovo - Manual (Page 49)

Lenovo IdeaPad A10
45
1080 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• “1010 Battery pack” on page 30
• “1020 System board” on page 32
• “1030 LCD unit” on page 35
• “1040 Base cover, audio board, speakers and power board” on page 37
• “1050 LCD front bezel” on page 40
• “1060 LCD panel, LCD cable and hinges” on page 42
• “1070 Integrated camera” on page 44
Figure 8. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the cables from
the cable guide, and then remove the antenna assembly in the direction shown
by arrows
.
When installing: Route the antenna cables along the cable guides and secure the
antenna boards with adhesive tapes. As you route the cables, make sure that they
are not subjected to any tension. Tension could cause the cables to be damaged
by the cable guides, or a wire to be broken.
a
a
a