Lenovo E10-30 User Manual

Page 33

Advertising
background image

Chapter 4. Troubleshooting

29

A hard disk drive problem

The hard disk drive does
not work.

In the Boot menu in the BIOS setup utility, make sure
that the hard disk drive is included in the UEFI Boot
priority order

or the Legacy Boot priority order list.

Other problems

Your computer does not
respond.

To turn off your computer, press and hold the power
button for 4 seconds or more. If the computer still
does not respond, remove the battery pack and the
AC power adapter.

Your computer might lock when it enters sleep mode
during a communication operation. Disable the sleep
timer when you are working on the network.

The computer does not
start from a device you
want.

See the UEFI Boot priority order or the Legacy Boot
priority order

list of the BIOS setup utility. Make sure

that the BIOS setup utility is set so that the computer
starts from the device you want.

Also make sure that the device from which the
computer starts is enabled. Make sure that the device
is included in the UEFI Boot priority order or the
Legacy Boot priority order

list in the BIOS setup

utility correctly.

The connected external
device does not work.

Do not connect or disconnect any external device
cables other than USB while the computer power is
on; otherwise, you might damage your computer.

When using a high power consumption external
device such as an external USB optical disk drive, use
an external device power adapter. Otherwise, the
device may not be recognized, or system shut down
may result.

Advertising