Replacing the hard disk drive or solid-state drive – Lenovo ThinkPad 11e User Manual

Page 129

Advertising
background image

1. Install the coin-cell battery

1

. Then attach the connector

2

.

2. Install the cover

1

and pivot it downwards

2

. Then tighten the screws

3

.

3. Turn the computer over again. Connect the ac power adapter and all cables.

Replacing the hard disk drive or solid-state drive

Before you start, print these instructions.

Attention: The hard disk drive or solid-state drive is very sensitive. Incorrect handling can cause damage
and permanent loss of data. Observe the following guidelines:

• Replace the hard disk drive or solid-state drive only if you upgrade it or have it repaired. The connectors

and slot of the hard disk drive or solid-state drive are not designed for frequent changes, or drive
swapping.

• Do not drop the drive or subject it to physical shocks. Put the drive on a material, such as soft cloth, that

absorbs any physical shocks.

• Do not apply pressure to the cover of the drive.

• Do not touch the connector.

• Before removing the hard disk drive or solid-state drive, make a backup copy of all the information

on it, and then turn the computer off.

Chapter 9

.

Replacing devices

113

Advertising
This manual is related to the following products: