Lenovo ThinkPad 11e - Manual (Page 79)

Table 4. Config menu items (continued)
Menu item Submenu item Value Comments
• The Wake on LAN
function does not
work when a hard disk
password is set.
Ethernet LAN Option ROM
(for Legacy Only boot
mode or Both with Legacy
first)
• Disabled
• Enabled
Load the Ethernet LAN
Option ROM to enable
startup from an integrated
network device.
UEFI IPv4 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
• Disabled
• Enabled
Enable or disable Internet
Protocol Version 4 (IPv4)
network stack for the UEFI
environment.
UEFI IPv6 Network Stack
(for UEFI Only boot mode
or Both with UEFI first)
• Disabled
• Enabled
Enable or disable Internet
Protocol Version 6 (IPv6)
network stack for the UEFI
environment.
UEFI PXE Boot Priority
(for Both with UEFI first
boot mode, and IPv6
and IPv4 stacks are both
enabled.)
• IPv6 First
• IPv4 First
Select network stack
priority for UEFI preboot
execute environment (PXE)
boot.
USB UEFI BIOS Support • Disabled
• Enabled
Enables or disables boot
support for USB storage
devices.
Always On USB • Disabled
• Enabled
If you select Enabled, the
external USB devices can
be charged through the
Always-on USB connector
even when the computer is
in low-power mode (sleep,
hibernate, or power-off).
- Charge in Battery
Operation • Disabled
• Enabled
If you select Enabled, the
external USB devices can
be charged through USB
connectors even when
system is hibernate or
power-off and in battery
operation.
USB
USB 3.0 Mode • Disabled
• Enabled
Set the USB 3.0 controller
mode for the connectors
shared between USB 2.0
and USB 3.0 controllers.
If you select Enabled, it
enables USB 3.0 mode
and allows USB 3.0 to be
supported in the operating
system.
If you select Disabled, it
disables and hides the USB
3.0 controller, and the USB
Chapter 5 . Advanced configuration 63