Lenovo ThinkVision Pro2820 28 inch FHD MVA LED Backlit LCD Monitor - Manual (Page 25)

Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
Note: You must download file from the Reference and Driver CD to use the Plug and Play
feature in Windows 7.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then turn on the computer. Allow your computer to boot into
Windows 7 operating system.
4. Open the Display Properties window by clicking Start, Control Panel and then click the
Hardware and Sound icon.
5. Click the Display icon.
6. Click the Adjust Resolution button.
7. Click the Advanced Settings button.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Open the "Update Driver Software­Generic PnP Monitor" window by clicking on
Update Driver and then click the "Browse my computer for driver software" button.
12. Select “Let me pick from a list of device drivers on my computer”.
13. Insert the Lenovo Monitor CD into the CD drive and click the Have Disk button.
14. Click on the Browse button and navigate to the following directory: X:\Monitor Drivers\ (where
X is the drive letter designator for the CD-ROM drive). Select the “ThinkVision Pro2820D.inf” file and
click the Open button. Click the OK button.
15. Select Lenovo ThinkVision Pro2820D and click Next. The files will be copied from the
CD to your hard disk drive.
16. Close all open windows and remove the CD.
17. Restart the computer.
The system will automatically select the maximum refresh rate and corresponding color
matching profiles.
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.
3-6 ThinkVision Pro2820 Flat Panel Monitor User’s Guide