Lenovo ThinkCentre A51 - Manual (Page 17)

Options
The following options are supported by the ThinkVantage Fingerprint Software.
Table 6. Options supported by the ThinkVantage Fingerprint Software
Parameter Description
OTP • 0 = Disable the RSA SecurID support feature.
• 1 = Enable the RSA SecurID support feature.
The default value is 0.
CTRLONCE Displays the Control Center only once. The default value
is 0.
CTLCNTR • 0 = Do not display Control Center at startup.
• 1 = Display Control Center at startup.
The default value is 1.
DEFFUS • 0 = Do not use Fast User Switching (FUS) settings.
• 1 = Use FUS settings.
The default value is 0.
DEVICEBIO Configures the device type that will be used by the user.
• DEVICEBIO=#3 - Use the device sensor to save the
first enrollment.
• DEVICEBIO=#0 - Use the hard disk drive to save the
enrollment.
• DEVICEBIO=#1 - Use the Companion Chip to save the
enrollment.
INSTALLDIR Set the installation directory.
OEM • 0 = Install with support to server passports or server
authentication.
• 1 = Install only standalone-computer mode with local
passports.
The default value is 1.
PASSPORT Set the default passport type.
• 1 = Local passport
• 2 = Server passport
The default value is 1.
POSSSO • 1 = Enable single sign-on.
• 0 = Disable single sign-on.
The default value is 1.
PSLOGON • 0 = Disable the fingerprint logon.
• 1 = Enable the fingerprint logon.
The default value is 0.
REBOOT Suppresses all reboots including prompts during
installation by setting to Really Suppress.
SECURITY • 1 = Install in the secure mode.
• 0 = Install in the convenient mode.
Chapter 2 . Installation 9