Lenovo ThinkCentre A51 - Manual (Page 24)

Table 8. User-specific commands (continued)
Command Syntax Description
Edit enrolled user
Example:
fprconsole user edit
domain0\testuser
fprconsole user edit
testuser
EDIT [username [| domain\
username]]
If the user name is not specified, then
the current user name is used.
Note: The enrolled user must verify his
fingerprint first.
Delete a user
Example:
fprconsole user delete
domain0\testuser
fprconsole user delete
testuser
fprconsole user delete
/ALL
DELETE [username [| domain\
username | /ALL]]
The /ALL flag will delete all users
enrolled on this computer. If the user
name is not specified then the current
user name is used.
Enumerate enrolled users
List
Lists the enrolled users.
Export enrolled user to a file
Syntax: EXPORT username
[| domain\username] file
This command will export an enrolled
user to a file on the hard disk drive. The
user then can be imported using the
IMPORT command on other computer
or on the same computer, if the user
is deleted.
Import enrolled user
Syntax: IMPORT file
The command will import the user from
the specified file.
Note: If the user in the file is already
enrolled on the same computer using
the same fingerprints then it is not
guaranteed which user will have
a precedence in the identification
operation.
Global settings commands
The global settings of the Fingerprint Software can be changed by the SETTINGS section. All the commands
in this section need administrators rights. The syntax is:
FPRCONSOLE SETTINGS command
where command is one of the following commands: SECUREMODE, LOGON, CAD, TBX, SSO.
16 Fingerprint Software Deployment Guide