Selecting a supported display mode, Selecting a supported display mode -6 – Lenovo ThinkVision E2323s 23-inch FHD WLED Backlit LCD Monitor User Manual

Page 16

Advertising
background image

Selecting a supported display mode

The display mode the monitor uses is controlled by the computer. Therefore, refer to your

computer documentation for details on how to change display modes.

The image size, position and shape might change when the display mode changes. This

is normal and the image can be readjusted using automatic image setup and the image

controls.

Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or Flat

Panel technology is inherently flicker-free.

Note: If your system has previously been used with a CRT monitor and is currently

configured to a display mode outside the range of this monitor, you may need to re-attach

the CRT monitor temporarily until you have re-configured the system; preferably to

1920x1080 at 60 Hz, which is the Native Resolution Display mode.

The display modes shown below have been optimized at the factory.

Table 2-3. Factory set display modes

Addressability

Refresh rate

640x350

70Hz

640x480

60Hz, 72Hz,75Hz

720x400

70Hz

800x600

56Hz, 60Hz, 72Hz, 75Hz

832x624

75Hz

1024x768

60Hz, 70Hz, 75Hz

1152x864

75Hz

1280x1024

60Hz, 70Hz, 75Hz

1366x768

60Hz

1440x900

60Hz

1600x900

60Hz, 75Hz

1680x1050

60Hz

1920x1080

60Hz

© Copyright Lenovo 2013. ©

Chapter 2. 2-6

Advertising