Lenovo IdeaPad S100c Notebook User Manual
Page 44
Advertising
40
Appendix. CRU instructions
6 If a DDR3 SDRAM is already installed in the memory slot, remove it to
make room for the new one by pressing out on the latches on both edges
of the socket at the same time. Be sure to save the old DDR3 SDRAM for
future use.
7 Align the notch of the DDR3 SDRAM with the protrusion of the socket
and gently insert the DDR3 SDRAM into the socket at a 30-45° angle.
8 Push the DDR3 SDRAM inward toward the socket until the latches on
both edges of the socket are pushed into the closed position.
9 Reinstall the compartment cover and tighten the screws.
0 Reinstall the battery pack.
A Turn the computer over again. Connect the AC adapter and the cables to
the computer again.
a
a
b
a
b
Advertising