Lenovo E43 Notebook User Manual
Page 36
30
Chapter 2. Using your computer
Changing or removing the user password
To change the password, do the following:
1
Select Set User Password, and press the Enter key. The Set User
Password window opens.
2
Type the correct password in the Enter Current Password field. Press
the Enter key once to move to the Enter New Password field, then type
in a new user password.
3
Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4
Commit your password to memory, and press the Enter key.
To remove the password, do the following:
1
Select Set User Password, and press the Enter key.
2
Type the correct user password in Enter Current Password, and finally
press the Enter key thrice.
Note
:
Make sure Password on boot is set to Enabled if you desire password
protection at power on.