Lenovo LI2063 Wide Flat Panel Monitor - Manual (Page 16)

Selecting a supported display mode
The display mode the monitor uses is controlled by the computer. Therefore, refer to
your computer documentation for details on how to change display modes.
The image size, position and shape might change when the display mode changes.
This is normal and the image can be readjusted using automatic image setup and the
image controls.
Unlike CRT monitors, which require a high refresh rate to minimize flicker, LCD or
Flat Panel technology is inherently flicker-free.
Note: If your system has previously been used with a CRT monitor and is currently
configured to a display mode outside the range of this monitor, you may need to re-
attach the CRT monitor temporarily until you have re-configured the system;
preferably to 1600 x 900 at 60 Hz, which is the Native Resolution Display mode.
The display modes shown below have been optimized at the factory.
Table 2-3. Factory set display modes
Chapter 2. 2-7
Addressability Refresh rate
640 x 480 60Hz 72Hz 75Hz
700 x 570 50Hz
720 x 400 70Hz
800 x600 56Hz 60Hz 72Hz 75Hz
640 x 350 70Hz
832 x 624 75Hz
1366 x 768 60Hz
1152 x 864 75Hz
1280x1024 60 Hz 70Hz 75Hz
1440x900 60Hz
1600x900 60Hz 75 Hz
1024 x 768 60Hz 70Hz 75Hz