Lenovo LI2063 Wide Flat Panel Monitor - Manual (Page 8)

Insert the power cord into the monitor , then plug the monitor power cord and
the computer cord into grounded electrical outlets.
4.
Note: A certified power supply cord has to be used with this equipment. The
relevant national installation and/or equipment regulations shall be considered. A
certified power supply cord not lighter than ordinary polyvinyl chloride flexible
cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2
3G0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according
to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.
Chapter 1. 1-4
Power on the monitor and the computer. 6.
Place the cable into the cable clip indicated in below figure.
Side view after all cables have been placed. 5.