Lenovo ThinkPad Reserve Edition - Manual (Page 54)

1. Touch a metal table or a grounded metal object. This action reduces any
static electricity in your body, which could damage the SO-DIMM. Do
not touch the contact edge of the SO-DIMM.
2. Turn off the computer ; then disconnect the ac adapter and all cables
from the computer.
3. Close the computer display, and turn the computer over.
4. Remove the bottom side of the leather cover (see “Detaching and
attaching the bottom side of the leather cover” on page 35).
5. Remove the battery.
6. Loosen the screws that hold the memory-slot cover in place
1 ; then
remove the cover
2 .
1
1
2
7. Remove one of two SO-DIMMs already installed to make room for the
new one by pressing out on the latches on both edges of the socket at the
same time. Be sure to save the old SO-DIMM for future use.
Replacing memory
44
ThinkPad ® Reserve Edition Service and Troubleshooting Guide