Lenovo ThinkPad Reserve Edition User Manual
Page 55
8.
With the notched end of the SO-DIMM toward the contact edge side of
the socket, firmly insert the SO-DIMM into the socket at an angle of
about 20 degrees
1 ; then pivot it downward until it snaps into place
2 .
9.
Reinstall the memory-slot cover and tighten the screws.
10.
Reinstall the battery.
11.
Attach the bottom side of the leather cover (see “Detaching and attaching
the bottom side of the leather cover” on page 35).
12.
Turn the computer over, and reconnect the ac adapter and the cables to
the computer.
To make sure that the SO-DIMM is installed correctly, do as follows:
1.
Turn the computer on.
2.
While the “To interrupt normal startup, press the blue ThinkVantage
button” message is displayed at the lower left of the screen, press the
ThinkVantage button. The Rescue and Recovery screen opens.
3.
Click Access BIOS. The System Restart Required window is displayed.
4.
Click Yes. The computer restarts, and the BIOS Setup Utility screen opens.
The “Installed memory” item shows the total amount of memory installed
in your computer.
Replacing memory
Chapter 5. Upgrading and replacing devices
45