Lenovo C445 All-in-One - Manual (Page 46)

Step 9. Remove the two screws that secure camera to the front bezel. 1
Step 10. Lift up the camera 2 and disconnect the data cable from the camera. 3
Step 11. To install the new camera:
a. Connect the data cable to the new camera.
b. Line up the holes in the new camera with the mounting holes on the front bezel and secure it
with the two screws.
Step 12. Reattach the middle cover, optical drive, stand holder, foot cover and stand base.
Removing the EMI cover
Note: Turn off the computer and wait 3 to 5 minutes to let it cool down before removing the cover.
Note: It may be helpful to place the computer face-down on a soft flat surface for this procedure. Lenovo
recommends that you use a blanket, towel, or other soft cloth to protect the computer screen from scratches
or other damage.
To replace the EMI cover
Step 1. Remove any media (disks, CDs, DVDs, or memory cards) from the drives, shut down the operating
system, and turn off the computer and all attached devices.
Step 2. Unplug all power cords from electrical outlets.
40 Lenovo C345/C445 All-In-One PCHardware Maintenance Manual