Lenovo ThinkPad Tablet 2 - Manual (Page 55)

Removal steps of front-facing camera
2
1
3
When installing: Ensure that the connector is attached firmly.
1070 Touch sensor board, I/O cable, and I/O board
For access, remove these FRUs in order:
•
“1020 Base cover assembly” on page 43
• “1030 Built-in battery” on page 44
• “1040 Rear-facing camera assembly” on page 45
• “1060 NFC card, system board, and front-facing camera” on page 47
• “1050 Wireless WAN card” on page 46
Note: The touch sensor board is attached to the top of the I/O board.
Chapter 7 . Removing or replacing a FRU 49