Lenovo ThinkStation P300 - Manual (Page 96)

Replacing the mSATA solid-state drive
To replace the mSATA solid-state drive, do the following:
1. Turn off the computer and disconnect all power cords from electrical outlets.
2. Remove the computer cover. See “Removing the computer cover” on page 74.
3. Remove the front bezel. See “Removing and reinstalling the front bezel” on page 74.
4. Locate the card reader drive bay. See “Locating internal drives” on page 7.
5. Press the release tab 1 as shown and pivot the drive bay assembly upward.
Figure 26. Pivoting the drive bay assembly upward
6. Disconnect the signal cable and power cable from the mSATA solid-state drive.
84 ThinkStation P300 User Guide