Hot-swap hard-disk-drive backplane – Lenovo ThinkServer RD340 User Manual
Page 45
ThinkServer RAID 710 Adapter (also known as 9270CV-8i RAID adapter)
The following illustration shows the connectors on the ThinkServer RAID 710 Adapter.
Figure 21. ThinkServer RAID 710 Adapter
1
Port 1
3
ThinkServer RAID Super Capacitor Module connector
2
Port 2
1
Port 1
Used to connect a mini-SAS signal cable. See “Connecting the cables” on page 36.
2
Port 2
Used to connect a mini-SAS signal cable. See “Connecting the cables” on page 36.
3
ThinkServer RAID Super Capacitor Module connector
Used to connect the cable of a ThinkServer RAID Super Capacitor Module. See “Replacing the ThinkServer
RAID Super Capacitor Module” on page 147.
Hot-swap hard-disk-drive backplane
Your server might come with one of the following hot-swap hard-disk-drive bay and backplane configurations:
• Four 3.5-inch hard-disk-drive bays with one backplane
• Six 2.5-inch hard-disk-drive bays with one backplane
• Eight 2.5-inch hard-disk-drive bays with one backplane
To locate the backplane, see “Server components” on page 25.
Backplane for server models with four 3.5-inch hard-disk-drive bays
This topic provides information to help you locate the connectors on the backplane for server models
with four 3.5-inch hard-disk-drive bays.
33