Lenovo IdeaPad V360 - Manual (Page 70)

66
IdeaPad V360 Hardware Maintenance Manual
1170 Antenna assembly and LCD cover
For access, remove these FRUs in order:
• “1010 Battery pack” on page 34
• “1020 Dummy card” on page 35
• “1030 Hard disk drive(HDD)/Mini PCI Express Card slot compartment cover”
on page 36
• “1040 Hard disk drive” on page 37
• “1050 DIMM compartment cover and DIMM” on page 38
• “1060 PCI Express Mini Card for wireless LAN/WAN” on page 40
• “1070 Keyboard” on page 42
• “1080 Keyboard bezel” on page 44
• “1090 System board” on page 48
• “1120 LCD unit” on page 56
• “1140 LCD front bezel” on page 61
• “1150 LCD panel, LCD cable and hinges” on page 62
Figure 17. Removal steps of antenna assembly and LCD cover
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the
direction shown by arrows
1
.
1
1
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.