ADTRAN TSU 600 - Manual (Page 123)

Appendix C. System Configuration Charts
61200.076L2-1 TSU 600 User Manual
111
Appendix C
System Configuration Charts
This appendix contains five steps/tables to support
the chapter, Example Operations. It is recommended
that these tables be copied and used as work sheets
when configuring the system.
Step 1: Configure Network
Table C-A
Control Pin Connection Configuration Chart for Network Interface
MENU ITEM SELECTION USED SELECTIONS AVAILABLE
1)FORMAT D4, ESF*
2)CODE AMI, B8ZS*
3)YEL ALARM ENABLE*, DISABLE
4)XMIT PRM ON, OFF*
5)TIMING MODE NETWK* (NI), INTERNAL, BASE DTE,
SECONDARY INTERFACE, NORMAL
6)LINE BUILD 0dB*, 7.5dB, -15dB, -22.5dB, AUTO
7)INBAND LOOPBK ACCEPT*, REJECT
8)BIT STUFFING DISA*, ENA
*= Factory Default