AT&T 250 - Manual (Page 15)

14
TELEPHONE MEMORY
Dialing Numbers in
Memory
For two-touch dialing:
1 Lift the handset.
2 Press and release M,
then press the number
button (0-9) where the
memory number is stored.
Storing Memory
Numbers
1 Press and release P.
2 Dial the telephone
number (up to 24 digits).
3 For one-touch dialing, press
and release the memory
button where you want to
store the number (locations
, , and )
— OR —
For two-touch dialing, press
M, then press the
number button (0–9) where
you want to store
the number.
One-Touch
Dialing
For one-touch
dialing, lift the
handset and press
the memory button.
Storing a Pause
in a Memory
Number
Press and release
R once to store a
3.6-second pause in
the dialing sequence,
twice for a
7.2-second delay,
three times for a
10.8-second delay.
NOTE: Each 3.6-
second pause counts
as one digit when
storing numbers in
telephone memory.
Directory Card
Use the directory
card on the base to
write the numbers
(or names) stored
in telephone
memory.
This telephone can store 13 telephone numbers, each up to 24 digits long.
You can dial numbers stored in memory by pressing one or two buttons.
NOTE: Numbers
stored in memory may
be lost if the phone is
unplugged from the
line jack for more than
four hours.