AT&T 250 - Manual (Page 17)

16
CALLER ID OPERATION
Reviewing Call
History
The screen displays call
information for about 30
seconds after it has been
received.
1 To review earlier calls,
press -.
2 To advance through
Call History from an
earlier call, press +.
When you reach the
end of Call History, the
screen displays
END OF LIST, then
begins again.
Display Dial
Dial a displayed phone
number while
reviewing calls in call
history.
1 Lift the handset.
2 Press and release
D
. The
screen displays the
number being
called. If the screen
displays
Error, the
present number
cannot be dialed.
You cannot use this
feature to dial
PRIVATE calls.
Display Dial
Options
You can check or
change the way a
number in call history
is dialed.
1 Press +or - until
the screen displays
the number you
want to call.
2 Press
D
to
make the call
— OR —
Press N to
scroll through
choices for dialing
the number
(without a “1,” or
with a “1” followed
by the area code).
Call History
This product assigns
each incoming call a
number from 1 to 99.
The most recent call
will have the highest
number. When the
memory is full, the
oldest call information
is deleted to make room
for new incoming call
information.