AT&T 7402 - Manual (Page 5)

Your 7402 Plus Voice Terminal
The 7402 Plus voice terminal is designed so you can conveniently use the many
features of the AT&T DEFINITY

Communications System Generic 2 and
System 85. Familiarize yourself with your voice terminal, shown in Figure 1
below and explained on the following page.
Figure 1. 7402 Plus Voice Terminal
Starting at the top of Figure 1 and continuing clockwise:
Handset For placing and answering calls. In most cases, you
must lift the handset (go off-hook) before you can use a
feature. Also known as the receiver.
Call appearances/
feature buttons
For handling incoming and outgoing calls (call
appearances), labeled with extension numbers. For
accessing features (feature buttons), labeled with
feature names.
Speaker/headset adapter
jack (on back of voice terminal)
For connecting an external speaker or headset adapter
to your voice terminal. Located on the back of your
voice terminal near the center, and is labeled .
Line jack
(on back of voice terminal)
For connecting a line cord to your voice terminal.
Located on the back of your voice terminal just to the
right of the center, and labeled ‘‘LINE.’’
Select button When used with Drop
Test
you can test the lights and
ringer on your voice terminal. When used with
Conference
Ring
you can select a personalized ring from among
8 available patterns.
Transfer button For transferring a call to another voice terminal.
Hold button For putting a call on hold.
1