Konica Minolta bizhub 282 - Manual (Page 63)

2 Administrator Operations
2-46 362/282/222
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.7.1 Executing Overwrite All Data
2
Note
Do not leave the machine with the Admin. Management mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Admin. Management mode.
<Setting can be made only from the control panel>
0 For the procedure to call the HDD Management to the display, see steps
1 and 2 of “Setting the HDD Lock Password” on page 2-25.
1
Call the HDD Management to the screen from the control panel.
2
Touch [Overwrite All Da-
ta].
3
Touch [Yes].
4
Touch [Enter].