Konica Minolta bizhub 282 - Manual (Page 72)

User Operations 3
362/282/222 3-5
Use
r Op
er
at
ions
Chapter 3
% If the Enhance Security function is set to [ON], the machine counts
entry of a wrong Secure Print Password as unauthorized access. If
a wrong Secure Print Password is entered three times, a message
appears that tells that authentication has been unsuccessful for any
subsequent authentication attempt. The machine is then set into an
access lock state, rejecting any access to Secure Print. To cancel
the access lock state, the Administrator of the machine must per-
form the Unlock operation. Contact the Administrator of the ma-
chine.
10
Check the document in-
formation and touch
[Print].
– If [Delete] is touched,
a message appears
that prompts you to
confirm if the Secure
Print selected may
be deleted. Touch
[Yes] if the Secure
Print may be deleted.
? What happens if Secure Print is deleted?
% If Secure Print is deleted, the data is overwritten and deleted with
0x00
→ 0x00 → 0x00 through the Temporary Data Overwriting func-
tion.
11
Touch [Enter].
!
Detail
When printing is executed for Secure Print, the Secure Print is automati-
cally deleted. When Secure Print is deleted, the data is overwritten and
deleted with 0x00
→ 0x00 → 0x00 through the Temporary Data Overwriting
function.