Konica Minolta bizhub 36 - Manual (Page 46)

Loading paper 1
1-40 bizhub 42/36
1.19
1.19 Loading paper
Follow the procedure described below to load paper into the various paper trays.
Loading paper into the tray 1
Paper can be fed manually through the tray 1 when you wish to print onto paper of a size that is not loaded
into a paper tray, or when you wish to print onto envelopes, OHP transparencies or other special paper.
Follow the procedure described below to load paper into the tray 1.
1
Open the tray 1.
% When loading large-sized paper, pull out the tray extension.
2
Load the paper into the tray.
% Load paper so that the side to be printed on faces downward.
% Do not load so many pages that the top of the stack is higher than the + mark.
% Up to 150 sheets plain paper can be loaded.
% Slide the lateral guides to fit the size of paper to be loaded.
3
From the touch panel, select the paper size.