Konica Minolta bizhub 36 - Manual (Page 57)

bizhub 42/36 1-51
1.21 Replacing consumables 1
When there are no more staples in the Finisher FS-529, the following message appears.
Reference
- For details on the replacement procedure for Finisher FS-529, refer to page 1-53 of this manual.
Replacing the toner bottle
The following procedure describes how to replace a toner bottle.
NOTICE
Before installing the new toner bottle, shake it up and down five to ten times.
Keep used toner bottles in their plastic bags inside their boxes to be collected by your service representative.
Do not force toner bottle (toner container) open or disassemble the toner bottle.
Even when toner remains in toner bottle (toner container), do not try to remove toner from the bottle or discard
the toner.
1
2
3 6
4 5
7
1
1
1
2
2
2