Konica Minolta BIZHUB C652DS - Manual (Page 29)

bizhub C652/C652DS/C552/C552DS/C452 3-3
3.1 Control panel 3
6 [Utility/Counter] Press to display the Utility screen and the Meter
Count screen.
7 [Reset] Press to clear all settings (except programmed
settings) entered using the control panel and
touch panel.
8 [Interrupt] Press to enter Interrupt mode. While the machine
is in Interrupt mode, the indicator on the [Inter-
rupt] key lights up in green and the message
"Now in Interrupt mode." appears on the touch
panel. To cancel Interrupt mode, press the [Inter-
rupt] key again.
9 [Stop] Pressing the [Stop] key during scanning tempo-
rarily stops the scan operation.
10 [Proof Copy] Press to print a single proof copy to be checked
before printing a large number of copies. You can
check the finishing state on the touch panel by
pressing this key before scanning or copying.
11 [Start] Press to start scanning. When this machine is
ready to begin a scan operation, the indicator on
the [Start] key lights up in blue. If the indicator on
the [Start] key lights up in orange, scan operation
cannot be started.
When a job is temporarily stopped, press this key
to restart the job.
12 Data indicator Flashes in blue while a print job is being received.
Lights up in blue when data is being printed.
13 [C] (Clear) Press to erase a value (such as the number of
copies, a zoom ratio, or a size) entered using the
keypad.
14 Keypad Use to enter the number of copies to be pro-
duced,
Use to enter the zoom ratio.
Use to enter the various settings.
15 [Guidance] Press to display the Guidance screen. From this
screen, you can view descriptions of the various
functions and details of operations.
16 [Enlarge Display] Press to enter Enlarge Display mode. If you use
PageScope Authentication Manager for authenti-
cation, the Enlarge Display screen is not availa-
ble.
17 [Accessibility] Press to display the screen for configuring set-
tings for user accessibility functions.
18 [Access] If user authentication and account track settings
have been applied, press this key after entering
the user name and password (for user authentica-
tion) or the account name and password (for ac-
count track) in order to use this machine. Press
this key to log off from the machine as well.
19 [Brightness] dial Use to adjust the brightness of the touch panel.
20 [User Box] Press to enter User Box mode.
While the machine is in User Box mode, the indi-
cator on the [User Box] key lights up in green. For
details, refer to the "User's Guide [Box Opera-
tions]".
21 [Fax/Scan] Press to enter Fax/Scan mode.
While the machine is in Fax/Scan mode, the indi-
cator on the [Fax/Scan] key lights up in green.
No. Name Description