Konica Minolta BIZHUB C652DS - Manual (Page 191)

bizhub C652/C652DS/C552/C552DS/C452 10-2
10.1 Configuration before use 10
10 Administrator Mode Settings
Configure Fax/Scan settings in the Administrator mode.
10.1 Configuration before use
10.1.1 E-mail
Before using E-mail transmission or Internet Fax, configure the following items. This section introduces basic
items. Also refer to the "User's Guide [Network Administrator]" for details.
- The E-mail address of the administrator
- TCP/IP Settings
- E-Mail TX (SMTP)
d
Reference
For details, refer to the "User's Guide [Network Administrator]".
10.1.2 User Box
Before saving data in User Boxes, configure the following items. For details on saving data in a User Box,
refer to the "User's Guide [Box Operations]".
- Create User Box
d
Reference
For details on the procedure for configuring settings for it, refer to the "User's Guide [Box Operations]".
10.1.3 SMB
Before using SMB transmission, configure the following items. This section introduces basic items. Also refer
to the "User's Guide [Network Administrator]" for details.
- TCP/IP Settings
- SMB Client Setting
d
Reference
For details, refer to the "User's Guide [Network Administrator]".
10.1.4 FTP
Before using FTP transmission, configure the following items. This section introduces basic items. Also refer
to the "User's Guide [Network Administrator]" for details.
- TCP/IP Settings
- FTP Settings
d
Reference
For details, refer to the "User's Guide [Network Administrator]".
10.1.5 G3 Fax
Before using G3 Fax, configure the following items.
- Header Information
– Refer to page 10-14.
- Line Parameter Setting
– Refer to page 10-17.