4 administrator settings (g3), Administrator settings (g3) -13, P. 10-13) – Konica Minolta BIZHUB C652DS User Manual
Page 202: Fax (p. 10-13)
bizhub C652/C652DS/C552/C552DS/C452
10-13
10.4
Administrator Settings (G3)
10
10.4
Administrator Settings (G3)
This section describes administrator settings that are configured for G3 Fax TX. The descriptions in this
section also apply to Network Fax.
10.4.1
System Settings - Power Save Settings - Enter Power Save Mode
Select the condition on which the machine shifts to the power save mode.
-
Normal: When a fax is received during the power save mode, the fax job is printed. After a
predetermined time has elapsed, the machine shifts to the power save mode.
-
Immediately (default): When a fax is received during the power save mode, the fax job is printed and
then the machine immediately shifts to the power save mode.
10.4.2
System Settings - Output Settings - Print/Fax Output Settings - Fax
Specify the printing method for RX documents.
-
Batch Print (default): Printing is started after all documents are received.
-
Page Print: Printing is made each time a page of document is received.