Closed network rx, Forward tx setting, Closed network rx -23 forward tx setting -23 – Konica Minolta BIZHUB C652DS User Manual

Page 212: P. 10-23)

Advertising
background image

bizhub C652/C652DS/C552/C552DS/C452

10-23

10.4

Administrator Settings (G3)

10

Closed Network RX

Specify whether to use the Closed Network RX function. To use the function, specify a password that is used
for Closed Network RX.

Press [No] to clear the entered setting and then specify a password using the keypad. (up to 4 digits)

Reference

-

Closed Network RX is only available when the receiver has password transmission function.

Forward TX Setting

You can forward received documents to a preset recipient. The items that are to be configured are listed
below.

If two units of the fax kit FK-502 are installed, and [Individual Receiving Line Setup] is set to [ON] in
Administrator Settings, you can select either [Fax Line 1] or [Fax Line 2] to configure settings for each line.
For details on [Individual Receiving Line Setup], refer to page 10-18.

The following items are not available if Forward TX Setting is configured.

-

PC-Fax RX Settings

-

TSI User Box Settings

-

Memory RX Setting

Item

Description

Output Method

Forward & Print: Received document are forwarded and printed on this ma-
chine.
Forward & Print (If TX Fails): Received documents are forwarded and, if for-
warding fails, are printed on the machine.

Forward Dest.

Allows you to enter a fax number using up to 38 digits. It is also possible to
select it from the address book.

Select Line

If two units of fax kit FK-502 are installed, this setting can be specified for
each line.

Advertising
This manual is related to the following products: