Konica Minolta BIZHUB C652DS - Manual (Page 215)

bizhub C652/C652DS/C552/C552DS/C452 10-26
10.4 Administrator Settings (G3) 10
Reference
- You can also specify the registered group as the destination.
10.4.11 Fax Settings - PBX Connection Setting
Specify the PBX line connection method.
If the PBX connection mode is enabled, specify an access code for an outside line. An access code refers to
a number used to connect to an outside line, such as a number beginning with a zero ("0").
Outside line numbers specified here are dialed, after which fax numbers registered with the address book or
program are dialed.
Press [No] to clear the entered settings, and then specify an access code (0 to 9999) using the keypad.
Item Description
Action when TSI User Box is not set. Configure how the machine should react when a specified
User Box is not found.
[Automatically Print]: Prints received documents.
[Memory RX User Box]: Saves received documents in a Mem-
ory RX User Box.
[Specified User Box] : Saves received documents in a User
Box of this machine. Click [Specified User Box], and use the
keypad to enter a User Box number.
Print Specify whether to print a received document after receiving.
TSI User Box Registration Register destinations to which to distribute RX documents.
Up to 128 destinations can be registered. Select a desired
number, and then press [Edit].
TSI User Box Set-
ting Allows you to distribute received faxes to other fax machines
or User Boxes in this machine. Specify a sender's fax number
in [Sender (TSI)].
Specify a forwarding destination in [Forwarding Destination].
To distribute received faxes to other fax machines, specify
destinations with [Select from Address Book]. To distribute
them to User Boxes in the machine, specify destinations with
[Search by User Box Number].
•
A User Box for which confidential reception is enabled, and
a Relay User Box cannot be used for a forwarding destina-
tion.