Konica Minolta bizhub 181 - Manual (Page 12)

bizhub 181 x-11
26 [Reset] key • Clear all settings (except programmed settings) entered from
the control panel.
• Press to delete the job being specified.
27 [Interrupt] key/indi-
cator Press to enter Interrupt mode. The indicator lights up in green to
indicate that the machine is in Interrupt mode.
Press the key again to cancel Interrupt mode and return to the
mode before Interrupt mode was entered.
If this key is pressed while a computer document is being printed,
printing stops so that the interrupting copy job can be performed.
Press this key again to continue printing the computer document.
28 [Clear/Stop] key • Press to clear the entered number and letters.
• Press to stop a continuous copy operation.
• Press to stop the transmission/reception of the fax.
• Press to stop the print job from the computer.
29 [Start] key/indicator • Press to start a copy operation.
• If this key is pressed while this machine is warming up, the next
copy job is queued.
• The key lights up in green to indicate that copy jobs can be
queued, and the key lights up in orange to indicate that the ma-
chine is not ready to begin copy operations.
30 Keypad • Use to type in the number of copies to be produced.
• Use to type in the various settings.
• Use to type in fax numbers.
• Use to type in speed dial numbers and text.
• In Fax mode, the [
] key is used for tone transmissions (pulse
dialing), and the [#] key is used for accessing an outside line.
No. Part name Description