Konica Minolta bizhub 181 - Manual (Page 127)

4 Using the machine as a scanner
4-2 bizhub 181
Using
th
e ma
chine
as a
scan
ne
r
Chapter 4
4 Using the machine as a scanner
4.1 Scanning
If the TWAIN driver is installed on a computer, data scanned with this ma-
chine can be imported onto a computer.
Two operations are available: pull scan, where scanning is started with a
command from the computer, and push scan, where scanning is started by
pressing the [Start] key on the machine.
The following procedure provides descriptions of the pull scan and push
scan operations.
1
Start the application on the computer.
1
2
3
4