Konica Minolta bizhub 181 - Manual (Page 26)

bizhub 181 x-25
Loading the bypass tray
Paper can be fed manually through the bypass tray when you wish to print
onto paper of a size that is not loaded into a paper drawer, or when you wish
to print onto label sheets or other special paper.
This machine is equipped with a multi bypass tray, which can be loaded with
up to 100 sheets of plain paper, and a manual bypass tray, which can only
be loaded with one sheet of paper at a time.
Follow the procedure described below to load paper into the two bypass
trays.
1
Load the paper into the tray.
– Load the paper so that the side to be printed on faces down.
– Do not load so many pages that the top of the stack is higher than
the , mark.