Konica Minolta bizhub C754 - Manual (Page 17)

Loading 4
HDD TWAIN driver 4-2
3
Select the device you want to connect to, and then click [Connect].
– You can also select the device that you want to connect to from the
list of registered devices. For details, see "Selecting from the List of
Registered Devices" on page 6-3.
– For details about the "Select Devices" dialog box, see "Selecting
the Device to Load From" on page 6-1.
– When user authentication and account track authentication are
configured on the MFP (multifunction printer) side, various
authentication windows appear. For details, see "Loading with a
Device Whose Authentication Settings Have Been Configured" on
page 7-1.
– When the MFP (multifunction printer) is configured to disable
operations by the logged in user on documents accumulated in
boxes, the user will be unable to load documents.
– If you select the [Use this device for future session] check box, the
selected device will be used again the next time you connect. The
next time you select the HDD TWAIN driver, the "Select Devices"
dialog box will not open, and the Select Box dialog box will open
instead.
The Select Box dialog box opens.