Konica Minolta BIZHUB 223 User Manual
Page 200
bizhub 423/363/283/223
9-15
9.2
One-Touch/User Box Registration
9
2/3 page
3/3 page
Item
Description
[No.]
Press [No.], and then enter the registration number of the destination be-
tween 1 and 2000 (or between 1 and 1000 if no Hard Disk is installed). Press
[OK] without entering any number to register the smallest number available.
[Name]
Use the touch panel to enter the name to be registered in the address book
using up to 24 characters.
[User ID]
Enter the user ID for logging into the destination computer via the touch panel
(up to 63 bytes).
[Password]
Enter the password for logging into the destination computer via the touch
panel (up to 63 characters).
[Host Address]
Enter the host name, IPv4 address or IPv6 address as the host address for
the destination server.
The host name must be less than 63 characters in length.
•
If you enter a host name and then select to enter an IP address, the host
name is cleared.
•
If you enter the IP address and then press [Input Host Name], the IP ad-
dress is saved and displayed in the input screen.
•
Before entering the host name, check that the DNS settings are correctly
specified. For details, refer to the [User's Guide Network Administrator].
[File Path]
Enter the destination file path for saving data via the touch panel (up to 142
bytes).
[Proxy]
Select whether or not a proxy server is used.
[SSL Settings]
Select whether to enable SSL.
[Port Number]
Enter the port number (any number between 1 and 65535).
[Index]
Select the index. For a frequently used destination, specify the index charac-
ters and select [Favorites] at the same time. This allows you to find it more
easily.