Konica Minolta BIZHUB 223 - Manual (Page 129)

bizhub 423/363/283/223 5-68
5.13 Redialing (G3/IP) 5
5.13 Redialing (G3/IP)
Redialing refers to the operation to dial to the same destination again.
If a fax cannot be sent for example because the recipient's line is busy, the machine redials after a specified
period has elapsed.
5.13.1 Auto redialing
If a fax cannot be sent, for example because the recipient's line is busy, the machine automatically redials
the same destination for the number of redials specified in Line Parameter Setting.
The transmission job is handled as reserved job for redialing before the job is redialed.
5.13.2 Manual redialing
Redialing of a job for which the status is set to pending for redial, can be performed from the Job Details
screen.
Press the [Send] tab in [Job List] - [Job Details], select a job which status is Waiting To Redial, and press
[Redial].
5.13.3 Fax Retransmit (G3)
The job, which could not be sent although the number of redials reached the value specified in Line Parameter
Setting, is saved in Fax Retransmit User Box. Such jobs can be redialed manually by opening Fax Retransmit
User Box.
Press [Send], select the job that you want to send it again, and press [Fax].
Reference
- To save a document in the Fax Retransmit User Box, you must configure the Incomplete TX Hold set-
tings in Administrator Settings in advance. For details on the Incomplete TX Hold settings, refer to
page 10-25.
- For details on the Fax Retransmit User Box, refer to the [User's Guide Box Operations].