Konica Minolta BIZHUB 223 - Manual (Page 147)

bizhub 423/363/283/223 7-3
7.2 Fax forwarding (G3/IP/I-FAX) 7
7.2 Fax forwarding (G3/IP/I-FAX)
Received documents can be forwarded to the pre-set destination. The following shows the available func-
tions.
- This machine can be configured so that it forwards the document and prints the same document.
- If two units of Fax Kit FK-508 are installed for receiving/forwarding data with G3 Fax, the line used to
forward the data can be specified.
Reference
- These functions can be specified in [Fax Settings] - [Function Settings] - [Forward TX Setting] in Admin-
istrator Settings. For details, refer to page 10-24.
- When the IP address fax or Internet fax is received, and the received data is not supported, it is dis-
carded and not printed. For details, refer to page 6-4 (Internet fax) or page 6-5 (IP address fax).
- The IP address fax or Internet fax can be forwarded only when a Hard Disk is installed.