Konica Minolta BIZHUB 223 - Manual (Page 151)

bizhub 423/363/283/223 7-7
7.6 Relay distribution (G3) 7
7.6 Relay distribution (G3)
7.6.1 Description of relay distribution
A function to send fax via a relay distribution station. When a document is sent by fax, it is saved in a relay
distribution station and forwarded to the destination afterwards. When there are multiple broadcast destina-
tions at distant places, by grouping the broadcast destinations to the relay station for each region, the entire
amount of the communication charges can be reduced by doing the relay transmission from the relaying sta-
tion.
1. Relay instruction station
2. Long-distance call
3. Relay distribution station
4. Local call
5. Relay distribution destination
- The fax machine that requests a relay transmission and sends a document is referred to as [relay in-
struction station].
- The fax machine that receives fax data from the relay instruction station and relays it to the destination
is referred to as [relay distribution station].
- This function is available only if the relay distribution station's machine is capable of handling F code.
This function cannot be used together with the following functions.
- Polling TX
- Polling RX
- Bulletin board registration
- Bulletin board polling reception
- Password TX
7.6.2 To perform relay distribution
This machine can serve as a relay instruction station and relay distribution station.
To use this machine as a relay instruction station for sending fax data, refer to page 7-8.
To use this machine as a relay distribution station, the Relay User Box for saving documents for relay distri-
bution and the destinations must be registered to this machine.
To specify a group of destinations, the group must first be registered.
d
Reference
For details on registering the Relay User Box, refer to the [User's Guide Box Operations].
4
5
1 3 2