Konica Minolta BIZHUB 223 - Manual (Page 239)

bizhub 423/363/283/223 10-27
10.4 Administrator Settings (G3) 10
TSI User Box Setting
Specify whether to use the TSI User Box function. To use the function, configure the following items.
If two units of Fax Kit FK-508 are installed, and [Individual Receiving Line Setup] is set to [ON] in Adminis-
trator Settings, you can select either [Fax Line 1] or [Fax Line 2] to specify the forwarding destination for each
line. For details on [Individual Receiving Line Setup], refer to page 10-19.
If no Hard Disk is installed, the following screen appears.
d
Reference
For details on the TSI User Box function, refer to page 7-5.
Item Description
[Action when TSI User Box is not set.] Configure how the machine should react when a specified
User Box is not found.
[Automatically Print]: Prints received documents.
[Memory RX User Box]: Saves received documents in a Mem-
ory RX User Box.
[Specified User Box]: Saves received documents in a User Box
of this machine. Click [Specified User Box], and use the key-
pad to enter a User Box number.
If no Hard Disk is installed, the [Specified User Box] is not dis-
played.
[Print] Specify whether to print a received document after receiving.
[TSI User Box Registration] Register destinations to which to distribute RX documents.
Up to 128 destinations can be registered. Select a desired
number, and then press [Edit].