11 fax settings - pbx connection setting, Fax settings - pbx connection setting -28, Ing] (p. 10-28 – Konica Minolta BIZHUB 223 User Manual

Page 240

Advertising
background image

bizhub 423/363/283/223

10-28

10.4

Administrator Settings (G3)

10

Reference

-

You can also specify the registered group as the destination.

10.4.11

Fax Settings - PBX Connection Setting

Specify the PBX line connection method.

If the PBX connection mode is enabled, specify an access code for an outside line. An access code refers to
a number used to connect to an outside line, such as a number beginning with a zero ("0").

Outside line numbers specified here are dialed, after which fax numbers registered with the address book or
program are dialed.

Press [No] to clear the entered settings, and then specify an access code (0 to 9999) using the keypad.

[TSI User Box
Settings]

Allows you to distribute received faxes to other fax machines
or User Boxes in this machine. If no Hard Disk is installed in
this machine, the faxes cannot be distributed to User Boxes in
this machine.
Specify a sender's fax number in [Sender (TSI)].
Specify a forwarding destination in [Forwarding Destination].
To distribute received faxes to other fax machines, specify
destinations with [Select from Address Book]. To distribute
them to User Boxes in the machine, specify destinations with
[Search by User Box Number].

A User Box for which confidential reception is enabled, and
a Relay User Box cannot be used for a forwarding destina-
tion.

Item

Description

Advertising
This manual is related to the following products: