Konica Minolta BIZHUB 223 - Manual (Page 66)

bizhub 423/363/283/223 5-5
5.1 Operation flow 5
Reference
- If the optional Security Kit SC-507 is installed, and [Security Details] − [Password Copy] is set to [Yes]
in Administrator Settings, when scanning an original with a password embedded, a message prompting
you to enter a password appears. Press [Password], enter the password, and then press [OK]. On the
screen that reappears, press [Begin Authentication] to start sending.
- If the optional Security Kit SC-507 is installed, and [Security Details] − [Copy Guard] is set to [Yes] in
Administrator Settings, you cannot send an original with copy guard patterns embedded.
- For transmission using a reverse automatic document feeder, the optional Reverse Automatic Docu-
ment Feeder DF-621 is required.
5.1.3 Recalling a program
The following describes the procedure to use the scan/fax program.
To check the advanced preview, press Proof
Copy.(p. 5-9)
Press Start.
Press Fax/Scan.
Press Mode Memory.