Compactflash, Installing the compactflash card, Compactflash 206 – Konica Minolta magicolor 7450 II grafx User Manual

Page 220

Advertising
background image

CompactFlash

206

CompactFlash

If a CompactFlash card is installed, resources such as fonts, macros and pro-
files can be downloaded, and image files can be printed directly.

"

Only CompactFlash cards with a capacity of 256 MB or 512 MB can
be used.

"

The Collate, Hold Job, and job accounting functions are not available
with a CompactFlash card. These functions require that an optional
hard disk kit be installed.

"

Even if both a hard disk kit and CompactFlash card are installed at the
same time, only one of them can be used.

Installing the CompactFlash card

Note

If the installed CompactFlash card was used with a device other than
this printer, such as a computer or digital camera, the card is
automatically formatted and all of its data is deleted.

Note

It is very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on page 201.
In addition,
always handle circuit boards by their edges only.

1

Turn off the printer and discon-
nect the power cord and inter-
face cables.

Advertising
This manual is related to the following products: