Konica Minolta bizhub 750 - Manual (Page 15)

1 Before making copies
1-4 bizhub 750/600
Be
fo
re
m
a
k
ing
c
o
p
ies
Chapter 1
7 [Reset] key Press to clear all settings (except
programmed settings) entered in the
control panel and touch panel.
8 [Proof Copy] key Press to print a single proof copy to be
checked before printing a large
number of copies. (See p. 5-14.)
9 [Stop] key Pressing the [Stop] key during an
operation temporarily stops the
operation.
10 [Start] key Press to start an operation. When this
machine is ready to begin an
operation, the indicator on the [Start]
key lights up in green. If the indicator
on the [Start] key lights up in orange,
the operation cannot begin.
Press to restart a stopped job.
11 Main Power
indicator Lights up in green when the machine
is turned on with the main power
switch.
12 Data indicator Flashes in green while a print job is
being received.
Lights up in green when a print job is
queued to be printed or while it is
being printed.
13 Keypad Use to type in the number of copies to
be produced.
Use to type in the zoom ratio.
Use to type in the various settings.
14 [C] (clear) key Press to erase a value (such as the
number of copies, a zoom ratio, or a
size) entered using the keypad.
No. Part name Description