Konica Minolta bizhub 750 - Manual (Page 64)

Using copy functions 2
bizhub 750/600 2-27
Using copy f
unct
ions
Chapter 2
Touch [Auto] to automatically determine the
stapling or hole-punching position according to
the orientation of the loaded document. The
paper is stapled or holes are punched along the
long side of the paper if the document length is
11-11/16 in. or less or along the short side of the
paper if the document length is more than 11-11/
16 in.
3
Touch [OK], and then touch [OK] in the next
screen that appears.
The Basic screen appears again.