Konica Minolta bizhub 750 - Manual (Page 104)

Using scan functions 3
bizhub 750/600 3-25
Usin
g sca
n
fu
nct
ions
Chapter 3
Original Setting
Select the orientation in which the document is loaded
and the location of the binding margin for double-sided
documents.
These functions can be used together.
Setting Description
Original
Direction Select the orientation of the document. The
data is processed so that the top and bottom
of the document are correctly positioned
after the document is scanned. For details on
document orientation settings that are
available, refer to “Selecting the document
orientation (“Original Direction” settings)” on
page 1-22.
Bind Select the binding position, such as when
holes are punched in the document or the
document is stapled.
This adjusts the scan of double-sided
documents so that the binding position is not
reversed.
Left: Select this setting for a document with
binding on the left side.
Top: Select this setting for a document with
binding at the top.
Right: Select this setting for a document with
binding on the right side.
Auto: The binding is on the long side if the
page is 11-11/16 in. or less, or it is on the
short side if the page is more than 11-11/16
in..